Engine V-8
Type 5.0L 4V Ti-VCT V-8
Manufacturing location Essex Engine, Windsor, Ontario
Configuration Aluminum block and heads
Intake manifold Composite shell-welded with runner pack
Exhaust manifold Stainless steel tubular headers
Redline 7,000 rpm (est.)
Valvetrain DOHC, 4 valves per cylinder, variable intake, variable camshaft timing
Valve diameter/lift (mm) Intake: 37/12; Exhaust: 31/11
Pistons Cast aluminum
Connecting rods Forged steel
Ignition High-energy coil-on-plug
Bore x stroke 3.63 in x 3.65 in/92.2 mm x 92.7 mm
Displacement 302 cu. in./4,951 cc
Compression ratio 11.0:1 (est.)
Engine control system PCM
Horsepower 412 @ 7,000 rpm (est.)
Horsepower per liter 82.4
Torque 390 lb.-ft. @ 4,250 rpm (est.)
Recommended fuel 91 octane (unleaded 87 octane minimum)
Fuel capacity 16 gallons
Fuel delivery Sequential mechanical returnless
Oil capacity 8 quarts with filter (10,000-mile service interval)
Suspension
•Front Reverse-L independent MacPherson strut, 34.6-mm tubular stabilizer bar
•Rear 3-link solid (limited slip) axle with coil springs and Panhard rod and 44.0-mm solid stabilizer bar
Steering
•Type Electric Power Assist Steering (EPAS) with rack-and-pinion gear
•Ratio 15.8:1
•Turning circle curb-to-curb 33.4 ft. (est.)
Type Four-wheel power disc brakes with 4-sensor, 4-channel anti-lock braking system (ABS)
•Front 336 (13.2 in) x 36 mm vented discs, twin-piston 43-mm floating aluminum calipers
•Rear 300 (11.8 in) x 19 mm vented discs, single-piston 43-mm floating iron calipers